LAN Networking

LAN networking If you hope to add additional calculators to your network in the future, all you need are more Network interface Cards and 10BaseT cables. Simply plug the new network cards(s) into your figurer an run a cable form the card to single of the hubs open styles. For even greater expandability, the hub can be joined, or uplinked, to other hubs. If you look closely at the apparent motion of the hub, you will see a interface marked Uplink. To uplink a hub, simply insert a standard, straight-through 10BaseT cable between the Workgroup Hubs Uplink port and any of another hubs regular 10BaseT ports. A maximum of three hubs can be connected together.

For example, reproducible most hubs, a 5-Port Hubs port number 5 and Uplink port are joined internally. This means that when port 5 is in use, the uplink port cannot be used, and vice-versa. If you plan on victimization the uplink port, youll need to disconnect any cables that are connected to port 5. Setting up your network cards so...If you emergency to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper